919831084067 919831084067
Taknik Vyapar Private Limited

Manual Blow Pipe Cutting Nozzle

Manual Blow Pipe Cutting Nozzle

Preferred Buyer From

Location Worldwide

Solid Telurium Copper Swaged Cutting Nozzle for Head Mixing and Pre – Mixing System for Acetylene

  • Mixing principal, Oxy/Acetylene gases
  • Preheat cones are close together to promote better economy of gases
  • Preheat holes are available 6,8&9 depends upon the thickness of metal to be cut
  • Cutting capacity 1/8” to 12” thick
  • 09 sizes of central hole available for cutting different thickness of metal
  • 45 degree 02 seat cone
  • Can be used for hand cutting or Machine cutting


Two Piece Nozzle for Natural Gas / Propane

  • Mixing principal, Oxy/Natural gas or Propane
  • Preheat slots are designed for preheat cones are close together to promote faster cutting and also economy of gases
  • 02 seat, 45 degree cone
  • 09 sizes of central holes are available.
  • Cutting capacity 1/8” to 12” thick
  • Can be used for hand cutting and Machine cutting
  • Pre-heat slots are available 12,15&20 slots according to thickness of metal to be cut
  • Do not use Acetylene


Two Piece Nozzle for Natural Gas / Propane

  • 03-seat cone 30 degree
  • Turbulence effect provided at Gas mixing chamber which help to achieve proper heat output
  • Mixing principal at nozzle
  • Preheat slots are designed for preheat cones are close together to promote faster cutting and also economy of gases.
  • 09 sizes of central holes are available
  • Cutting capacity 1/8” to 12” thick
  • Can be used for Hand cutting and Machine cutting
  • Pre-heat slots are available 12,15&20 slots according to thickness of metals to be cut
  • Do not use Acetylene.


Solid Telurium Copper Swaged Cutting Nozzle

  • Mixing principal at Nozzle
  • Preheat cones are close together to promote better economy of gases
  • Preheat holes are available 6,8&9 depends upon the thickness of metal to be cut
  • Cutting capacity 1/8” to 12” thick
  • 09 sizes of central hole available for cutting different thickness of metal
  • 30 degree 03 seat cone
  • Can be used for hand cutting or Machine cutting

Yes! I am interested

Submit Your Requirement


Specifications

NOZZLE SIZE   THICKNESS TO
BE CUT
PRESSURE OF
OXYGEN
MM INCHES In MM In Kgf/cm2
0.79 1-32" 3-6 1.5
1.19 3-64" 6-19 3.0
1.59 1/16" 19-75 4.0
1.59 1/16" 75-100 5.0
1.98 5/64" 100-150 6.0
2.38 3/32" 15-200 7.5
2.87 7/64" 200-250 8.0
3.17 1/8" 250-300 8.0

 


  • Explore More Products




Looking for "Manual Blow Pipe Cutting Nozzle" ?